Keysight ixia UHD100T32 - Page 18

Specifications
UHD100T32
Perpetual
Part number: 944-
1180
UHD100T32
Base Subscription
Part number:
U100-BASE
UHD100T32
Standard
Subscription
Part number: U100-
STANDARD
l FEC statistics:
o
FEC Corrected and Uncorrected Codeword Counts
l Independent fan-out ports with physical fan-out media for up to
2×50GE per QSFP28 port
40GE:
l Auto-negotiation (AN), Clause 73 for passive copper DAC
l Link training for copper cable media, Clause 73
25GE:
l Auto-negotiation (AN), Clause 73 for passive copper DAC.
l Link Training (LT) for 25GE copper DAC media (Clause 93, 110)
Note: Clause 72 link training patterns are not supported
l Ethernet Forward Error Correction:
o
FC-FEC, Clause 74 for BASE-R PHYs
o
RS-FEC, Clause 108 for 25GBASE-R PHYs
l FEC statistics:
o
FEC Corrected and Uncorrected Codeword Counts
l Ability to independently turn ON or OFF AN with Link training, or FEC,
or to allow IEEE defaults to automatically manage the interoperability
l Independent fan-out ports with physical fan-out media for up to
4×25GE per QSFP28 port
10GE:
l Independent fan-out ports with physical fan-out media for up to
4×10GE per port
Transceiver
Support
l 100GBASE-SR4 and 4×25GBASE-SR QSFP28 for multimode fiber
o
Pluggable transceiver
o
100GE speed support requires a point-to-point cable
o
40GE speed support requires a point-to-point
o
25GE speed support requires a point-to-point cable or a fan-out
cable
o
10GE speed support requires a point-to-point cable or a fan-out
cable
l 100GBASE-LR4 QSFP28 for single-mode fiber
Chapter 1 About UHD100T32
– 3 – 913-2626-01