12 N1000A Quick Start Guide
1 Introduction
Accessories
Optional Accessories
• 11667B Power splitter, dc to 26.5 GHz, APC 3.5 mm
• 11667C Power splitter, dc to 50 GHz, 2.4 mm
• 54006A 6 GHz Resistive divider probe kit
• 54008B 24 ns delay line
• N1020A 6 GHz TDR probe kit (passive)
• N1022A Active Probe Adapter
• N1024A TDR Calibration Kit
• N1025A 1 GHz Active Differential Probe
Optional Adapters for Electrical Channel Inputs
• SMA (f-f) adapter, Keysight part number 1250-1158
• APC 3.5 (f-f) adapter, Keysight part number 5061-5311
Optional Adapters for Optical Channel Inputs
Table 1 on page 13 shows the available fiber-optic adapters for optical channels.
These adapters connect onto the front-panel optical channel connectors. FC/PC
adapters come pre-installed on new optical modules. Changing fiber-optic
adapters is easy. Simply hand turn an adapter counter-clockwise to remove it from
a channel connector; to install a different adapter, hand turn the new adapter
clockwise onto the connector.
To Next Page
Loading...
