18 N1000A Quick Start Guide
2 Installing the N1000A
Step 1. Inspect the Shipment
• Inspect the shipping container and instrument for damage.
Keep the shipping container and cushioning material until you have inspected
the contents of the shipment for completeness and have checked the
instrument mechanically and electrically.
• Locate the shipping list. Verify that you received all the accessories and options
that you ordered. The following list shows some of the items that may be on the
shipping list. The information on your actual shipping list is more accurate and
should supersede the information in this list.
• The N1000A and some modules may come with adapters or connector savers
either pre-installed or in their own packaging.
Package Contents
• N1000A DCA-X Series Wide-Bandwidth Oscilloscope
•Keyboard, USB
•Mouse, USB
•Power cord
• Module bay filler panel (Qty. 2)
• ESD warning pamphlet
• ESD warning sticker sheet
• IO Libraries Media Suite CD
Instrument Options
An N1000A can have options STB or LOJ but cannot have both. Option GPI is
automatically installed on every N1000A.
• N1000A-STB, Standard timebase.
• N1000A-LOJ, Low jitter timebase.
• N1000A-PLK, Pattern lock hardware. Requires option N1000A-LOJ.
• N1000A-PTB, Internal precision timebase.
• N1000A-GPI, GPIB Card Interface (installed on every N1000A)
• N1000A-AFP, Filler panel.
Software Options
• N1010100A R&D Software Package. Provides the following features that, on the
86100D, were included in options:
• Advanced Eye Analysis
• Data Analytics Web Service Software
• Enhanced Jitter Analysis
• Equalizers (CTLE, DFE, LFE)
• FlexDCA Remote Access Software
• FlexEye Independent Eye Acquisition and Analysis
• InfiniiSim-DCA Waveform Transformation Toolset
To Next Page
Loading...
