6 N1000A Quick Start Guide
1 Introduction
N1000A Includes a PC
The N1000A includes a PC that is running Windows 10. The N1000A’s FlexDCA
Graphical User Interface (GUI) is the same Windows application as the N1010A
FlexDCA Remote Access Software. The N1000A includes the standard PC
connectors on the instrument’s rear-panel as shown in the following figure.
Figure 2 Rear-Panel Connectors
As with any computer, you should consider the following points to maintain
security and protect your N1000A:
• Install Windows security updates as soon as they become available.
• Consider installing anti-virus software.
• When connected to the LAN, avoid visiting web sites or downloading material
that are not completely secure and trusted.
• Never connect a pen drive or external memory device to the N1000A that has
not been tested for viruses or malware.
• Follow the advice of you company’s IT department.
• For N1000A firmware upgrades, go to
http://www.keysight.com/find/N1000A_Firmware.
To Next Page
Loading...
