22 N1000A Quick Start Guide
2 Installing the N1000A
Step 3. Position the N1000A
Position the N1000A so that it will have sufficient clearance for airflow around the
top, back, and sides. Review Table 2 to confirm that your operating or storage
environment is suitable for the instrument.
Table 2 Environmental Specifications
Item Specification
Use For indoor use only
Temperature
Operating
10 °C to +40 °C (50 °F to + 104 °F)
Non-operating
–40 °C to +70 °C (–40 °F to +158 °F)
Maximum relative humidity Type tested at 95% RH, +40 degrees C
(non-condensing)
Altitude (Operating) Up to 4,600 meters (15,000 ft)
Line Power
*
* The instruments can operate with mains supply voltage fluctuations up to ±10% of the nominal voltage.
100/120Vac, 50/60/400 Hz
220/240Vac, 50/60 Hz
700 Watts Max.
Weight
Mainframe without Modules (characteristic)
19.5 kg (43 lb)
Modules (characteristic)
1.2 kg (2.6 lb)
Dimensions (excluding handle)
Without front connectors and rear feet
234 mm H x 426 mm W x 530 mm D
(9.23 inch x 16.76 inch x 20.9 inch)
With front connectors and rear feet
234 mm H x 426 mm W x 601 mm D
(9.23 inch x 16.76 inch x 23.67 inch)
With front cover and rear feet
234 mm H x 426 mm W x 612 mm D
(9.23 inch x 16.76 inch x 24.1 inch)
The official and complete specifications are located in the N1000A’s help system.
To Next Page
Loading...
