Keysight N1000A DCA-X Series - 4 Instrument Markings and Regulatory Information

39
N1000A Quick Start Guide
4 Instrument Markings and
Regulatory Information
The instruction documentation symbol. The product is marked with this symbol when it is
necessary for the user to refer to the instructions in the documentation.
The ON/STANDBY symbol. The ON, OFF and STANDBY symbols are used to mark the positions of
the instrument power line switch.
The AC symbol. The AC symbol is used to indicate the required nature of the line module input
power.
The chassis ground symbol. The chassis ground symbol is used to indicate a chassis connection.
The CE mark is a registered trademark of the European Community.
The CSA mark is a registered trademark of the CSA International.
The RCM mark is a registered trademark of the Australian Communications and Media Authority.
ISM 1-A This is a symbol of an Industrial Scientific and Medical Group 1 Class A product (CISPR 11,
Clause 5)
ICES/NMB-001 This is a marking to indicate product compliance with the Canadian Interference-Causing
Equipment Standard.
Cet appareil ISM est conforme a la norme NMB du Canada.