Keysight N1000A DCA-X Series - Step 4. Install the Modules

24 N1000A Quick Start Guide
2 Installing the N1000A
Step 4. Install the Modules
1 Slide your modules into the front-panel module bay. Single-slot modules can
be installed in any of the four slots. Two-slot modules can be installed in slots
1/2 or 3/4 but not 2/3. Three-slot modules can be installed in slots 1/2/3 only.
2 While gently pressing on the top inch of the module’s front panel, finger tighten
the knurled locking screws.
Figure 8 Installing a Module
DCA-X
DCA-X Series Wide-Bandwidth Oscilloscope N1000A
1234
Trigger
Input
(2.92mm)
DC Cal
50Ω
DC-32GHz
2Vpp Max
±
Precision
Timebase
Input
(2.92mm)
50Ω
2.4-44GHz
2V Max
Marker
Position
Vertical
Horizontal
Acquisition
Armed
Triggered
Press to
select
Press to
select
Vertical
10mW Max Optical
2V Max DC
86105
Filter Rates
39.8 Gb/s
43 Gb/s
m
9/12
1300-162
1.85mm
0.57Nm torque
5
0
Module
Filler Panel
Locking Screws