Installing the N1000A 2
N1000A Quick Start Guide 29
User Accounts
Windows is configured with the following two user accounts: dca-admin and
dca-service. The dca-service account is the only account that is password protected
and is only provided for factor technicians. This account is not customer
accessible.
Avoid touching the screen with a sharp object, as this could result in damage to the
display. Instead, use your finger.
To ensure proper operation of the N1000A, open the instrument’s help system. Click
under Safety, click Introduction and, in the displayed topic, click the Windows OS tab.
This topic includes information on settings that you should avoid changing.
The front-panel ON/Standby switch places the instrument in standby. The instrument is still
energized.
When you press the ON/Standby switch to place the instrument in standby mode, there is a
small time delay before you’ll see a change on the instrument. This is normal and does not
indicate a problem.
To Next Page
Loading...
