Contacting Keysight 5
N1000A Quick Start Guide 43
• The carton must be large enough to allow approximately 7 cm (3 inches) on all
sides of the instrument for packing material, and strong enough to
accommodate the weight of the instrument.
• Surround the equipment with approximately 7 cm (3 inches) of packing
material, to protect the instrument and prevent it from moving in the carton. If
packing foam is not available, the best alternative is S.D-240 Air Cap™ from
Sealed Air Corporation (Commerce, California 90001). Air Cap looks like a
plastic sheet filled with air bubbles. Use the pink (anti-static) Air Cap™ to
reduce static electricity. Wrapping the instrument several times in this material
will protect the instrument and prevent it from moving in the carton.
4 Seal the carton with strong nylon adhesive tape.
5 Mark the carton “FRAGILE, HANDLE WITH CARE”.
6 Retain copies of all shipping papers.
To Next Page
Loading...
