26 Keysight N774-C & 8162-C Series User’s Guide
2 Getting Started
The D-shaped adapter type are held magnetically for quick adapter
change. The heads also include a removable 81624DD adapter ring for use
with the threaded type adapters. The heads are connected to the N7749C
optical head interface.
Following are the benefits of using 8162-C optical power heads:
• Low relative uncertainty reduces the impact of connectorizing and fiber
handling and leads to a robust test setup
• The 5 mm large-area detector is less susceptible for connector
misalignment and guarantees highly repeatable measurement results.
Lower power per mm² makes the optical head more suitable for high
power measurements and guarantees better linearity.
See Optical Head Adapters on page 37.
For further details on its application and key features, refer to the product
datasheet available on www.keysight.com.
To Next Page
Loading...
Need help?
General
