Keysight N774 C Series User Manual

50 Keysight N774-C & 8162-C Series User’s Guide
2 Getting Started
• You can now use Interactive IO within the Connection Expert to
communicate with your instrument, or you can program your
instrument using the various programming environments. You can also
use the Web browser on your computer to communicate with the
instrument as described under User Interface Reference on page 71.
USB Connection
The following figure illustrates a typical USB interface system:
• Connect your instrument to the USB port on your computer using a
USB cable.
• Use the Connection Expert utility of the Keysight IO Libraries Suite to
add the instrument and verify a connection. To add the instrument, you
can request the Connection Expert to discover the instrument. If the
instrument cannot be found, add the instrument using its hostname or
IP address. You can find additional details here: Connecting the
Instrument on page 54.
• You can now use Interactive IO within the Connection Expert to
communicate with your instrument, or you can program your
instrument using the various programming environments.
NOTE
If this does not work, refer to “Troubleshooting Guidelines” in the
Keysight Technologies USB/LAN/GPIB Interfaces Connectivity Guide
included with the Keysight IO Libraries Suite.
NOTE
Your PC will detect a new USB Mass Storage Device (read-only) and a
new virtual Ethernet link over USB. This interface assigns itself an IP
address from the block 100.61.nnn.nnn and your PC 100.61.nnn.nnn
(n+1).

Keysight N774 C Series Specifications

General

Brand	Keysight
Model	N774 C Series
Category	Measuring Instruments
Language	English