Keysight N774 C Series - How to Configure LAN

Keysight N774-C & 8162-C Series User’s Guide 93
User Interface Reference 4
How to Configure LAN?
Show the Current LAN Settings
The Configure LAN tab on the N774-C user interface displays the currently
used LAN settings. It display the following networking parameters:
• IP address configuration
• IP address
• Subnet mask
•Default gateway
•DNS server(s)
•Hostname
•Domain
Edit LAN Settings
The Configure LAN tab also allows you to edit the currently used LAN
settings. To do so,
1Click on the Edit button. The Edit Network Configuration page will
appear as shown in the figure below: