Keysight N774 C Series User Manual

Keysight N774-C & 8162-C Series User’s Guide 77
User Interface Reference 4
Show/Hide Marker
To show/hide markers on the graph, go to Settings and then click
Show/Hide Markers toggle button. When this button is enabled, the
markers appear on the graph. The blue circle on the graph denotes the
maximum power while the orange circle on the graph denotes the
minimum power measure duration a given time interval.
Start/Stop Graph Measurement
You can start or stop the graph measurement at any point of time. To do
so. go to Settings and then click on the Start/Stop toggle button. By
default this option is enabled. However, once you disable this button, you
will notice that the measurements in the graph are stopped until it is
enabled.
Exporting Measurement Results
You can export the numerical measurement results in to a CSV format. To
do so, go to Settings and then click the Export CSV option.
Reset Markers
At any point of time you can click on the Reset Markers button to reset the
markers on the graph.

Keysight N774 C Series Specifications

General

Brand	Keysight
Model	N774 C Series
Category	Measuring Instruments
Language	English