113
Command Reference
MMEMory Subsystem
MMEMory Subsystem
The purpose of the MMEMory subsystem is to provide access to
internal or external disk drives.
Keysight N9320B spectrum analyzers use instrument internal local
storage device.
The MMEMory command syntax term <file_name> is a specifier
having the form: name.ext, where the “name” is a file name of up to
29 characters, letters (A-Z, a-z) and numbers (0-9) only (lower
case letters are read as uppercase). The “ext” is an optional file
extension using the same rules as “name,” but consists of up to
three characters total.
Catalog the Selected Memory Location
:MMEMory:CATalog?
The return data will display the saved file list with related file
information.
Example: :MMEMory:CATalog? lists the saved files in the Local memory.
Key access:
Delete a File
:MMEMory:DELete ‘<file_name>’
Delete a file.
Example: :MMEM:DEL ‘source.sta’
Remarks: If <file_name> does not exist, an error will occur.
Key access: > Delete
To Next Page
Loading...
