Command Reference
DANalyse Subsystem
88
Restart Sweep
DANalyse:IMMediate
To restart the current sweep or measurement, or set of
averaged/held sweeps or measurements. This function first aborts
the current sweep/measurement as quickly as possible. It then
resets the sweep and trigger systems, sets up the measurement
and initiates a new data measurement sequence with a new data
acquisition (sweep) taken once the trigger condition is met.
Example: :DANalyse:ASK:RESTart
DANalyse:AM/FM Subsection
Carrier Power Query
DANalyse:CARR:Power?
Queries the carrier power of AM/FM signal.
Modulation Rate Query
DANalyse:CARR:MRAte?
Queries the modulation rate of AM/FM signal.
Frequency Deviation Query
DANalyse:CARR:FDUL?
Queries the frequency deviation of FM signal.
Amplitude Modulation Depth Query
DANalyse:CARR:MDEPth?
Queries the modulation rate of AM signal.
To Next Page
Loading...
