89
Command Reference
DANalyse Subsystem
Average On/Off
DANalyse:AM|FM:AVERage ON|OFF|1|0
DANalyse:AM|FM:AVERage?
Turns the average function on or off.
*RST: Off
Key access:
> AM/FM Modulation Analysis > More > Average On/Off
Average Point Number
DANalyse:AM|FM:AVERage:COUNt <integer>
DANalyse:AM|FM:AVERage:COUNt?
To specify the number of measurement averages used when the
Average is set to on.
*RST: 10
Key access:
> AM/FM Modulation Analysis > More > Average On/Off
Detector
DANalyse:AM|FM:DETector PPK|NPK|PNPK|RMS
DANalyse:AM|FM:DETector?
Sets the detector type to positive peak, negative peak, average
peak or RMS.
*RST: PNPK = average peak = (positive peak + negative peak)/2
Key access:
> AM/FM Modulation Analysis > Detector
Peak Hold
DANalyse:AM|FM:DETector:PEAKhold OFF|ON|0|1
DANalyse:AM|FM:DETector:PEAKhold?
Turns the peak hold function on or off.
*RST: off
Key access:
> AM/FM Modulation Analysis > Detector > Peak Hold
To Next Page
Loading...
