Command Reference
SYSTem Subsystem
158
SYSTem Subsystem
This subsystem is used to set the controls and parameters
associated with the overall system communication. These
functions are not related to instrument performance.
Brightness
:SYSTem:BRIGhtness HIGH|MIDDLE|LOW
:SYSTem:BRIGhtness?
Sets and queries the brightness of the LCD display.
Key access: > More > More > Brightness
GPIB Address
:SYSTem:COMMunicate:GPIB[1][:SELF]:ADDRess <integer>
:SYSTem:COMMunicate:GPIB[1][:SELF]:ADDRess?
Sets and queries the GPIB address. This command applies only to
analyzers having Option G01. Only one Option G01 can be installed
in an instrument.
*RST: It is set to 18 by :SYSTem:PRESet:PERSistent, which sets the
persistent state values to their factory defaults. This command is
persistent. The term persistent means that the command retains
the setting previously selected, even through a power cycle.
Range: Integer, 0 to 30
Key access: > More > More > Show GPIB Address
Hardware Configuration Query
:SYSTem:CONFigure:HARDware?
Returns string of information about the current hardware in the
instrument.
Key access: > More > Show Hardware
To Next Page
Loading...
