Keysight N9320B - Page 93

87
Command Reference
DANalyse Subsystem
Preamp On/Off
DANalyse:POWer:GAIN OFF|ON|0|1
DANalyse:POWer:GAIN?
Sets the preamplifier on or off.
*RST: off
Key access:
> AM/FM/FSK/ASK Modulation Analysis > More > More >
Preamp
Attenuation
DANalyse:POWer:ATTenuation <value>
DANalyse:POWer:ATTenuation?
Sets the attenuation value when the attenuation is in manual
mode.
*RST: 0 dB
Key access:
> AM/FM/FSK/ASK Modulation Analysis > More > More >
Attenuation
Trigger a Single Sweep
DANalyse:IMMediate
Initiates a sweep and triggers a measurement in modulation
analysis mode.
Remarks: The analyzer must be in the single sweep mode. If
DANalyse:CONTinuous is ON, the command is ignored.
Key access:
> AM/FM/FSK/ASK Modulation Analysis > More > Single
Sweep Mode
DANalyse:CONTinuous OFF|ON|0|1
DANalyse:CONTinuous?
Toggles the sweep mode between continuous and single.
*RST: Cont
Key access:
> AM/FM/FSK/ASK Modulation Analysis > More > Sweep
MODE
MODE
MODE
MODE