Command Reference
MMEMory Subsystem
116
Store a Screen Image in a Graphic File
:MMEMory:STORe:SCReen ‘<file_name>’
Saves the current instrument screen image, as a graphic file, to the
specified file in memory. The file must have a jpg file extension. The
specified file extension determines which file format the instrument
will use to save the image.
Example: :MMEM:STOR:SCR ‘myscreen.jpg’
Remarks: This command will fail if the <file_name> already exists.
Key access: > Save> Type > Screen
Store an Instrument State in a File
:MMEMory:STORe:STATe 1,’<file_name>’
Saves the instrument state to the file in memory. This file data is
only readable by the analyzer.
Example: :MMEM:STOR:STAT 1,’mystate.sta’
Remarks: This command will fail if the <file_name> already exists.
Store a Trace in a File
:MMEMory:STORe:TRACe <label>,’<file_name>’
Saves the specified trace to a file in memory. The file name must
have a file extension of csv or trc. The file extension determines
whether just the trace data is stored, or the trace is stored with its
state. The .csv extension uses the CSV (comma-separated values)
format for the trace data in frequency/amplitude pairs. The .trc
extension is for files that include both trace and state data. The .trc
file data is only readable by the analyzer.
Example: :MMEM:STOR:TRAC TRACE3,’mytrace.trc’
Range: Trace labels are: TRACE1|TRACE2|TRACE3|TRACE4|ALL
Remarks: This command will fail if the <file_name> already exists.
Key access: > Save > Type > Trace
To Next Page
Loading...
