Command Reference
SYSTem Subsystem
162
Preset Type
:SYSTem:PRESet:TYPE FACTory|USER|LAST
Selects the preset state to be either factory-defined or
user-defined preset conditions.
*RST: The factory default is Factory. This parameter is persistent, which
means that it retains the setting previously selected, even through
a power cycle.
Remarks: :SYSTem:PRESet:USER:SAVE defines the user preset.
Key access: > Pwr On/Preset > Preset Type
Set Time
:SYSTem:TIME <hour>,<minute>,<second>
:SYSTem:TIME?
Sets the time of the real-time clock of the instrument.
Hour must be an integer 0 to 23.
Minute must be an integer 0 to 59.
Second must be an integer 0 to 59.
Key access: > More > Time/Date > Set Time
VGA Output
:SYSTem:VGAOput:[STATe] OFF|ON|0|1
:SYSTem:VGAOput:[STATe]?
Toggles the VGA output port in rear panel on and off.
Key access: > More > More > VGA Output
To Next Page
Loading...
