Keysight Streamline Series User Manual

Keysight P937xA PXIe Service Guide 85
Removal and Replacement Procedures
Post-Repair Procedures
Calibration:
Although the analyzer functions, its performance relative to its specifications
has not been verified. It is recommended that a full instrument calibration be
performed using the TME Performance Tests. Refer to the TME webpage at
http://cal.software.keysight.com. If any of the tests fail, perform the
Adjustments (refer to “Adjustments” on page 48), then repeat the tests.

Keysight Streamline Series Specifications

General

Brand	Keysight
Model	Streamline Series
Category	Measuring Instruments
Language	English