Keysight Streamline Series User Manual

Keysight P937xA PXIe Service Guide 45
Tests, Adjustments, and Troubleshooting
Test Management Environment (TME) Performance Tests
Test Management Environment (TME) Performance Tests
The performance tests verify the electrical performance of your USB-network
analyzer. For more information, refer to the TME webpage at
http://cal.software.keysight.com.
This section lists the test equipment needed to run performance tests. Models
for each test equipment category are given in order of preference. Alternate
models are also listed but should be considered a lower priority. All equipment
is Keysight, Agilent, or Hewlett Packard unless otherwise specified. Refer to
each individual test for specific setup configurations. The computer and all test
equipment are connected to the unit under test (UUT) using GPIB and PXI.
Requires a PC controller to run the (TME) Performance Tests.
Table 3-2 Required Test Equipment (TME Performance Testing)
Test Equipment Recommended Model Alternate Model
PNA network analyzer N5245A N5222A
N5224A
N5225A

N5242A
N5244A
N5245AS

E8363C
E8364C
Power meter
N1914
a
A
N1912A

E4419A
E4418A
Power sensor
(Refer to Guidelines for
Ordering Power-Sensor
Calibration Service)
N8485A None
Frequency counter 5320A Option 115 53131A
53132A Options 010 or 012,
and 124
53181A Options 010 and 124
Frequency reference
b
Frequency counter internal House standard
Dynamic accuracy test set U3020A-D01 None
Compression test set U3070A-K01 None

Keysight Streamline Series Specifications

General

Brand	Keysight
Model	Streamline Series
Category	Measuring Instruments
Language	English