Driving your vehicle
186
Smart regeneration system
Resuming smart regeneration
system
Operation
僅 Pull and hold the right side of the pad
-
dle shifter for more than approxi
-
mately 1 second again.
Turning smart regeneration sys
-
tem off
Operation
僅 Pull and hold the right side of the pad
-
dle shifter for more than approxi
-
mately 1 second.
Smart regeneration system mal
-
function and limitations
Smart regeneration system mal
-
function
A:
Check Smart Regeneration System
The message will appear when the sys
-
tem is not functioning normally. The sys
-
tem will be canceled and the word
AUTO
on the cluster will disappear and
instead display regenerative braking
level. Check for foreign substances on
the front radar. Remove any dirt, snow,
or foreign material that could interfere
with the radar sensors. If the system still
does not operate normally, have the
vehicle inspected by a professional
workshop. Kia recommends visiting an
authorized Kia dealer/service partner.
Limitations of smart regeneration
system
Driving on a curved road
When driving on the curve, the system
may not detect the vehicle in your lane
and the regenerative braking level will
reduce automatically, making you feel
that the vehicle is accelerating.
Also, if the system suddenly recognizes
the vehicle in front, the regenerative
braking level will increase automatically,
making you feel that the vehicle is decel
-
erating.
The driver must maintain a safe braking
distance, and if necessary, depress the
brake pedal to reduce your driving
speed in order to maintain a safe dis
-
tance.
The smart regeneration system may rec
-
ognize a vehicle in an adjacent lane
when driving on a curved road. In this
case, the system increase the braking
level and slow the vehicle.
Always pay attention to road and driving
conditions while driving. If necessary,
depress the brake pedal to reduce your
driving speed in order to maintain a safe
distance. Also, when necessary, you may
To Next Page
Loading...
