19
6
6
Driving your vehicle Smart regeneration system
depress the accelerator pedal to prevent
the system from unnecessarily deceler
-
ating your vehicle.
Always check the traffic conditions
around the vehicle.
Driving on a sloped road
When driving on an uphill or downhill,
the system may not detect the vehicle in
your lane and the regenerative braking
level will reduce automatically, making
you feel that the vehicle is accelerating.
Also, if the system suddenly recognizes
the vehicle in front, the regenerative
braking level will increase automatically,
making you feel that the vehicle is decel
-
erating.
The driver must maintain a safe braking
distance, and if necessary, depress the
brake pedal to reduce your driving
speed in order to maintain a safe dis
-
tance.
Changing lanes
When a vehicle changes lanes in front of
you, the smart regeneration system may
not immediately detect the vehicle,
especially if the vehicle changes lanes
abruptly. In this case, you must maintain
a safe braking distance, and if neces
-
sary, depress the brake pedal to reduce
your driving speed in order to maintain a
safe distance.
Recognizing the vehicle
Some vehicles in your lane cannot be
recognized by the sensor:
僅 Narrow vehicles such as motorcycles
or bicycles
僅 Vehicles offset to one side
僅 Slow-moving vehicles or sudden-
decelerating vehicles
僅 Stopped vehicles (When the vehicle
ahead drives away, the system may
not detect a stopped vehicle.)
僅 Vehicles with small rear profile such
as trailers with no loads
A vehicle ahead cannot be recognized
correctly by the sensor if any of follow
-
ing occurs:
僅 When the vehicle is pointing upwards
due to overloading in the luggage
compartment
僅 While the steering wheel is operating
僅 When driving to one side of the lane
僅 When driving on narrow lanes or on
curves
Apply the brake or accelerator pedal if
necessary.
To Next Page
Loading...
