Kia EV9 2024 - Page 404

Driver assistance guide
347
Blind-Spot Collision-Avoidance Assist (BCA)
WARNING
If Blind-Spot Safety is deselected, the
driver should always be aware of the
surroundings and drive safely.
CAUTION
When the trailer is connected, Blind-Spot
Collision-Avoidance Assist automatically
turns off (if equipped). In this case, you
cannot get help from Blind-Spot Colli
-
sion- Avoidance Assist. Always drive with
care.
NOTICE
If the vehicle is restarted, Blind-Spot Col
-
lision-Avoidance Assist will maintain the
last setting.
Warning Methods
1 Driver Assistance
2 Warning Methods
Warning Methods
can be scan be set
with the vehicle on. Select
Setup →
Vehicle → Driver Assistance → Warn
-
ing Methods from the settings menu in
the infotainment system to change the
following settings:
僅
Warning Volume : Adjusts the volume
of the warning sound.
僅
Haptic Warning : Activate the steer
-
ing wheel vibration warning.
僅
Driving Safety Priority : Lowers all
other audio volumes when the Driving
Safety system sounds a warning.
INFORMATION
僅Ensure that Warning Methods you
have set may apply to the
Warning
Methods of other driver assistance
systems.
僅
Warning Methods will maintain its
last setting even if the vehicle is
restarted.
僅 The setting menu may not be avail
-
able for your vehicle depending on
the vehicle features and specifica
-
tions.
僅 The
Warning Volume and Haptic
Warning
cannot be turned off at the
same time. When one of the warning
is turned off the other is activated.
Blind-Spot Collision-Avoidance
Assist operation
Blind-Spot Collision-Avoidance Assist
will warn and control as following opera
-
tion.
僅 Collision warning
僅 Collision-avoidance assist (while
departing)
Collision warning
Type A
OMV033124N
OMV053022