Kimo KIGAS 310 - Perform a Measurement of Ambient CO; Perform the Measurement; Link the Measurement to a Customer; Add the Measurement to a Group

13. Perform a measurement of ambient CO
2
13.1. Perform the measurement
➢ Connect a CO
2
probe (available as option) on C1 connection on the top of the analyser.
➢ Turn on the analyser.
➢ Go to the “Measurement” menu with the keypad then press OK.
The analyser performs the auto-zero: remaining time and a progress bar are displayed on the screen.
➢ Go to “Ambient CO
2
” with the keypad then press OK.
Measurement launches and the analyser displays the level of ambient CO
2
.
13.2. Link the measurement to a customer
When the measurement has been performed, it is possible to link it to a customer registered in the analyser or to a customer unregistered in the
analyser that must be created.
➢ Press the function button.
The analyser displays the list of recorded customers.
➢ Select a customer with up and down arrows then press OK or create a customer (see page 22) then select it.
The analyser displays the list of available boilers.
➢ Select the boiler with up and down arrows then press OK or create a boiler (see page 23) then select it.
The analyser backs to the measurement screen.
13.3. Add the measurement to a group
The group function has to be activated (see page 17).
Once the measurement is linked to a customer and a boiler, it is possible to add it in a group in the instrument, or create a group:
The analyser proposes to add the measurement to a group.
➢ Go to YES and press OK.
➢ Go to the required group with the arrows and press OK, or create a group (see page 24).
The analyser backs to the measurement screen.
13.4. Print the results
It is possible to print the results on the ticket:
➢ Press the function button.
Results are printed on the ticket.
See page 17 for the printing configuration.
Perform a measurement of ambient CO2 29
Put the probe of the KIGAZ 310 in the
draft hood, going through the front face
of the boiler
Put the probe of the KIGAZ 310 in the
nozzle output, from the beginning of the
connecting flue
Put the probe of the KIGAZ 310 in the
draft hood, going through the side
openings of the boiler