Table of contents
ANALYSER
1. Introduction.....................................................................................................................................................................................7
1.1. Description of the analyser........................................................................................................................................ 7
1.1.1. Overview of the gas analyser............................................................................................................................ 7
1.1.2. Presentation of the keypad and screen............................................................................................................. 8
1.1.3. Connection of the analyser............................................................................................................................... 8
1.2. Main features............................................................................................................................................................ 9
1.3. Technical features................................................................................................................................................... 11
2. Safety............................................................................................................................................................................................12
2.1. Precautions for use................................................................................................................................................. 12
2.2. Symbols used......................................................................................................................................................... 12
2.3. Safety instructions................................................................................................................................................... 12
3. Perform a flue gas analysis..........................................................................................................................................................13
3.1. Prepare the instrument before the analysis............................................................................................................. 13
3.2. Perform an analysis................................................................................................................................................ 13
3.3. Zoom function......................................................................................................................................................... 14
3.4. Assign the analysis to a customer........................................................................................................................... 14
3.5. Add the measurement to a group............................................................................................................................ 14
3.6. Print the analysis results......................................................................................................................................... 14
4. Perform a quick measurement......................................................................................................................................................15
5. Set the different parameters of the analyser................................................................................................................................16
5.1. Instrument setting.................................................................................................................................................... 16
5.1.1. Screen setting................................................................................................................................................. 16
5.1.2. Set the auto-off................................................................................................................................................ 16
5.1.3. Change the language...................................................................................................................................... 16
5.1.4. Modify date and time....................................................................................................................................... 16
5.1.5. Ticket printing setting...................................................................................................................................... 17
5.1.6. Activate or deactivate the visual support......................................................................................................... 17
5.1.7. Activate the group function.............................................................................................................................. 17
5.1.8. Select the alarm sound................................................................................................................................... 18
5.1.9. Activate or deactivate Bluetooth
®
function (optional).......................................................................................18
5.2. Set the combustible................................................................................................................................................. 18
5.2.1. Modify a combustible...................................................................................................................................... 18
5.2.2. Add a combustible........................................................................................................................................... 19
5.2.3. Delete a combustible....................................................................................................................................... 19
5.3. Set the alarms, measurement units and CO protection........................................................................................... 19
5.3.1. Set the alarms................................................................................................................................................. 19
5.3.2. Set the measurement units............................................................................................................................. 19
5.3.3. Set the CO protection threshold...................................................................................................................... 19
5.3.4. Set the display................................................................................................................................................ 20
5.4. Set the references................................................................................................................................................... 20
5.5. Set the auto-zero and purge time............................................................................................................................ 20
5.6. Set the operators..................................................................................................................................................... 20
5.6.1. Add an operator.............................................................................................................................................. 20
5.6.2. Modify the operator name............................................................................................................................... 20
5.6.3. Delete an operator.......................................................................................................................................... 21
5.7. Back to factory setting of the analyser.................................................................................................................... 21
5.7.1. Units and values of measurement settings of the factory setting....................................................................21
5.7.2. Device factory setting...................................................................................................................................... 21
6. Manage customers.......................................................................................................................................................................22
6.1. Create a customer................................................................................................................................................... 22
6.2. Modify a customer................................................................................................................................................... 22
6.3. Delete a customer................................................................................................................................................... 22
7. Manage boilers..............................................................................................................................................................................23
7.1. Create a boiler........................................................................................................................................................ 23
7.2. Modify a boiler......................................................................................................................................................... 23
7.3. Delete a boiler......................................................................................................................................................... 23
8. Manage the inspections................................................................................................................................................................24
8.1. Get to inspections................................................................................................................................................... 24
8.2. Create an inspection............................................................................................................................................... 24
8.3. Delete an inspection................................................................................................................................................ 24
8.4. Create a group........................................................................................................................................................ 24
8.5. Add an inspection to a group................................................................................................................................... 25
8.6. Delete a group........................................................................................................................................................ 25
9. Perform measurement of a customised procedure......................................................................................................................25
9.1. Preliminary operations to procedures...................................................................................................................... 25
To Next Page
Loading...
