Kinco KS Series - Chapter 3 Expansion Modules; 3.1 INTRODUCTION; 3.2 DO, DO 12×RELAY

Kinco-KS series
19
· Voltage
Chapter 3 Expansion modules
3.1 Introduction
KS series can expand with expansion modules. The power supply for KS expansion modules
is 24VDC. So we don’t need power supply from expansion CANopen.
KS expansion modules have one standard RS485 port. It can work as Modbus slave.
Note: Some address of Modbus RTU master start from 1,so the data in the below form should
add 1 directly.
Type
Mold
MODBUS coder
Area
MODBUS
Address
KS122-12XR
DO（0XXXX）
01，05，15
Q0.0-Q1.3
0-11
KS123-14DR
DI（1XXXX）
02
I0.0 --- I0.7
0-7
DO（0XXXX）
01，05，15
Q0.0-Q0.5
0-5
KS133-06IV
AI（3XXXX）
04
AIW0 --- AIW6
0-3
AO（4XXXX）
03，06，16
AQW0 --- AQWQ
0-1
3.2 DO
，
DO 12
×
Relay
Type：Kinco-KS122-12XR.
This modules is DO 12*Relay.