King-Meter E5227-U LCD - Sensor Configuration Options


26

PASSensorSetting
PASSensorDirectionSetting
Run indicates thePAS sensor direction setting.The displayshows
run.F/b. run.F stands for forward and run.b stands for reverse.
Switchby【UP】/【DOWN】.Press【MODE】 toconfirmandenter
thePASsensorsensitivitysetting.Thefactorydefaultvalueofthe
sensordirectionispositive.


PASSensorSensitivitySetting
ThedisplayshowsSCN,indicatingthesensitivityofthePASsensor.
Thesettingrangeis2‐9.2indicatethehighestsensitivityand 9
indicatethelowestsensitivity.Increase/decreasesettingvaluesby
【UP】/【DOWN】.Press 【MODE】toconfirmandenterthePAS
sensorproportionparametersettinginterface.Thefactorydefault
valueis2.