King-Meter E5227-U LCD - Throttle and System Parameters; Throttle Level Splitting Configuration


29

returntothedisplay’spersonalizationparametersettinginterface.
ThefactorydefaultvalueofthedisplayisN.

ThrottleLevelEnableSetting
HFindicatesthethrottlelevelsetting.HF:Nmeansthatthe
throttledoesn’tsplitlevelsaccordingtothePASratio.Ifthe
throttle level splitting is enabled, the maximum output of the
motor can only reach the speed of the corresponding PAS level
shownonthedisplaywhenturningthethrottle;ifnolevelsplitting,
it means that when the throttle is turned, the speed will not
limitedto thePAS levelshownon the display, it canreachto the
ratedmaximumspeed.Y/Ncanbesetby【UP】/【DOWN】.Press
and hold 【 MODE 】 toconfirmandreturntothedisplay’s
personalization parameter setting interface. The factory default
valueofthedisplayisN.