Kinvent K-Grip - K-Grip; User Qualification; Description; Benefits

K- SENSORS User Manual
K-Grip
User qualification
The K-Grip must be used by a health professional.
Description
K-Grip is used for the evaluation of hand grip
strength. You can assess isometric strength by the
way of the peak force as well as of the average force.
The Grip dynamometer quantitatively measures the
grip weakness caused by injury compared to the
strength of the healthy hand.
Benefits
K-Grip is equipped with electronic force transducers and gives you real-time biofeedback
on your tablet or smartphone through the Kinvent Physio app. Therefore, you can set
strength objectives for your patient and motivate him through the process of
rehabilitation. You will, then, follow-up your patient's progress through the Kinvent Physio
interactive database.
Technical Features
Minimum Requirements
Android 5.0+ or iOS 10.0+, Bluetooth Low
Energy
Weight
170 g / 6 oz
Dimensions (H x W x D)
A- Ribbon attachment point.
B- Button
Metric : 146.5 x 36 x 60.5 mm
US : 5.77 x 1.42 x 2.38 “
Wireless Range
Up to 40 meters / 44 yd
Max Force
90 kgs / 198 lbs
Battery
12 hours continuous use, 2h for charging
Power supply
Li-Po Battery 280 mAh
Radiated output Power
Max. 10 mW
Wireless transmission Frequency
2.4GHz band (Bluetooth Low Energy 5.1)
Adjustable handle size
Soft TPE detachable (magnetic) grip covers
Accuracy
< 0.2%, +-0.1kg / +-0.22lbs
Eco features
Self activated “sleep” mode after 10 minutes.
Units
Selectable in application KgF, N, lbs
Acquisition frequency
1000Hz
12 © 2022 KINVENT Biomecanique E2022C_EN