Kinvent K-Grip - K-Push; User Qualification; Description; Benefits

K- SENSORS User Manual
K-Push
User qualification
The K-Push must be used by a trained health
professional. The user must have received suf
ficient
training in clinical procedures to get reliable
measurements.
Description
K-Push is a handheld dynamometer used for the
strength evaluation of different muscles. You can
assess isometric strength through the peak force as
well as the average force for a speci
fic muscle or
muscle groups.
The K-Push allows to quantitatively measure the muscle strength and the de
ficit
percentage caused by injury compared to the strength of the healthy side.
Benefits
K-Push is equipped with electronic force transducers and gives real-time acoustic and
optic Biofeedback on your Smartphone or Tablet through the Kinvent Physio app.
Through its Target oriented exercises, you can set objectives to your patient and
encourage him to surpass himself. The app saves your participant's results. You can then
follow-up his progress on Maximal Force, Endurance, and muscular Symmetry on the
app's database.
Technical Features
Minimum Requirements
Android 5.0+ or iOS 10.0+, Bluetooth Low
Energy
Weight
370 g / 13 oz (including the starter pillow)
Dimensions (H x W x D)
Metric 49 x 142 x 76 mm;
US : 1.93 x 5.6 x 3”
Wireless Range
Up to 40 meters / 44 yd
Max Force
90 kgs / 198 lbs
Battery
12 hours continuous use, 2h for charging
Power supply
Li-Po Battery 280 mAh
Radiated output Power
Max. 10 mW
Wireless transmission
Frequency
2.4GHz band (Bluetooth Low Energy 5.1)
Adjustable handle size
Silicon pillow with soft center
Accuracy
< 0.1%, +-0.1kg / +-0.22lbs
Eco features
Self-activated “sleep” mode after 10 minutes.
Units
Selectable in application KgF, N, lbs
Acquisition frequency
1000Hz
14 © 2022 KINVENT Biomecanique E2022C_EN