Kinvent K-Grip - K-Move; User Qualification; Description; Benefits

K- SENSORS User Manual
K-Move
User qualification
The K-Move must be used by a health
professional.
Description
K-Move is an inertial sensor to measure the range
of motion and to compare the symmetry between
the injured limb’s amplitude and the healthy limb.
Benefits
K-Move is equipped with an IMU sensor and gives
you real-time biofeedback based on the evolving
range of motion compared to the initial movement position.
Accessories :
K-Move is provided with accessories for a turnkey operation:
Different size belts:
● 36cm / 14.1” used for biceps
● 57cm / 22.4” thighs/triceps
● 77cm / 30.3” torso/head
Technical Features
Minimum requirements
Android 5.0+ or iOS 10.0+, Bluetooth Low
Energy
Weight
18 g / 0.63 oz
Dimensions (H x W x D)
Metric 12.5 x 34.5 x 44.5 mm ;
US : 0.49 x 1.36 x 1.75 “
Wireless range
Up to 50 meters / 54 yd
Max Accelerations
+-16g
Static Accuracy
2°
Dynamic accuracy (head., pitch,
roll)
7°, 2°,2°
Power Supply
Li-Po Battery 160mAh
Battery
12h of autonomy, 1.5h for charging
Wireless transmission
frequency
2.4GHz band (Bluetooth Low Energy 5.1)
Data rate
400 Hz
20 © 2022 KINVENT Biomecanique E2022C_EN