Kinvent K-Grip - K-Deltas; User Qualification; Description; Benefits

K- SENSORS User Manual
K-Deltas
User qualification
The K-Deltas must be used by a health
professional.
Description
K-Deltas are two independent force platforms
for rehabilitating balance and assessing lower
limb muscular symmetry and strength.
Benefits
K-Deltas are equipped with electronic force
transducers and give real-time acoustic and
optic biofeedback on your Smartphone or
Tablet through the Kinvent Physio app.
Accessories
K-Deltas can be used with the following accessories
Deltas Frame is an accessory for the K-Force Deltas that allows it to stabilize the platforms
and to obtain a larger surface at equal height to perform jumps in complete safety. In
addition, it ensures reproducibility of measurements under similar conditions. The Deltas
Frame is made of rigid foam. Lightweight and transportable, it will ensure the safety of
your patients, it comes in a jigsaw format and can be easily dismantled for storage and
transport
IMTP - Isometric Mid-Thigh pull accessory. This is a specialized , transportable tool for
doing on
field assessments. The accessory consists of a platform, a middle bar and a hand
grip bar. The accessory along with the K-Deltas can be stored inside the same
flight case.
Technical Features
Minimum requirements
Android 5.0+ or iOS 10.0+, Bluetooth
Low Energy
Weight
8.8 kg/ 19.4 lbs per platform
Dimensions (H x W x L)
5 mm / 0.2” ground clearance
Metric 44 x 547 x368 mm
US: 1.73 x 21.53 x 14.48 “
Wireless range
Up to 20 meters / 22 yd
24 © 2022 KINVENT Biomecanique E2022C_EN