This manual concerns K-SENSORS products. The information content of this manual
belongs to KINVENT, and is provided only for the purpose of operating K-SENSORS and
software. This manual is subject to modi
fications. The latest version is available on
www.k-invent.com .
Manufacturer
KINVENT Biomécanique SAS
Cap omega, Rond-Point Benjamin Franklin,
34000 Montpellier, FRANCE
+33 4 67 13 00 33
info@k-invent.com
www.k-invent.com
Copyright KINVENT Biomécanique SAS. All rights reserved. This material may not be
reproduced by any means, physical or electronic, without prior written consent of
KINVENT Biomécanique
Revision: 12
Last revision: 2022-12-19
4 © 2022 KINVENT Biomecanique E2022C_EN
To Next Page
Loading...
