Kinze 851 - Track System Troubleshooting

M0276-01Grain Cart
2-32 Rev. 2/18
TM
Operation
TRACK SYSTEM TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Uneven tread wear High amount of roading Swap tracks side to side
Splits/opening on the side or top of
tread
High amount of roading or overheat of
tread
Swap tracks side to side. Replace tracks if
necessary.
Chunking on guide lug sides Track not aligned properly Align track
Side slope operation Contact dealer
Breakaway of track guide lugs Debris/material ingestion into track
system
Contact dealer
Correct tensioning not possible Verify position of track detensioning bolt
at rear idler assembly.
Bolt fully retracted with no preload on spring
applied
High temperature of idler or roller axle
hub.
Bearing failure Replace damaged bearing.
Lack of lubricant Check oil level in reservoir.
Mud/dirt buildup on idlers/midrollers Operation in muddy, wet or sticky soil
types
Clean mud/dirt regularly to prevent track
damage.