Kinze 851 - Gearbox Oil Level; PTO Shaft Coupling

M0276-01Grain Cart
3-2 Rev. 2/18
TM
Lubrication and Maintenance
GEARBOX OIL LEVEL
Gearbox Oil Capacity ........1⁄ Gallons ...SAE 90 weight oil.
Remove plug from fill/check plug hole on the gearbox. Oil level should be even with fill/check plug hole. Inspect oil at
end of each annual season of use for moisture and contaminates, if found, change oil before storage. A drain plug is
located on the bottom of the gearbox.
PTO SHAFT COUPLING
Clean and grease PTO shaft coupling each time PTO
is installed.
Apply a coating of high-speed industrial coupling grease,
such as Chevron
®
Coupling Grease meeting AGMA CG-1
and CG-2 Standards to extend life of shaft splines.
Fill/Check Plug
Drain Plug
Vent Plug