TM
Grain Cart
M0276-01
Rev. 2/18 3-1
Lubrication and Maintenance
20 Bolt Hub Shown
WHEEL BEARINGS
Wheel bearings should be checked and lubricated annually.
Raise wheel off the ground and support with axle. Remove
the dust cap. Check for endplay in bearings by moving tire
in and out. Rotate tire to check for roughness in bearings.
If bearings sound rough, the hub should be removed and
bearings inspected and replaced if necessary. Refer to
““Wheel Bearing Replacement” on page 3-22”.
If bearing replacement is not necessary, while wheel is
raised and dust cap removed, pump grease into hub until
grease comes out through bearing rollers. Replace dust cap.
Proper lubrication of all moving parts will help ensure efficient operation of your Kinze Grain Cart and prolong the life of
friction producing parts.
To Next Page
Loading...
