Kinze 851 - Driveline Inspection

TM
Grain Cart
M0276-01
Rev. 2/18 3-19
Lubrication and Maintenance
DRIVELINE INSPECTION
Inspect driveline after first 20 loads, at beginning of each season, and after every 150 loads or annually thereafter.
 Make a general inspection of driveline looking for loose hardware.
 Inspect all grease points for damage.
 Lubricate all grease fittings. See Lubrication section of this manual.
 Check gearbox oil level.
 Inspect bearings and seals in gearbox.
 Inspect PTO attaching hardware and safety shields.
 Repair or replace worn or damaged parts.