8-2 DK55
069O801A
TIRES
Though the tire pressure is factory-set
to the prescribed level, it naturally drops
slowly in the course of time. Thus, check
it everyday and inflate as necessary.
(A) Insuffient (B) Standard
(C) Excessive
WARNING
Do not use tires larger than speci-
fied.
Do not attempt to mount a tire.
This should be done by a quali-
fied person with the proper
equipment. Qualified persons
with the proper tire mounting
equipment should recognize the
following warning.
Never exceed 241 kPa (35 psi)
when attempting to seat a bead. If
beads have not been seated by the
time the pressure reaches 241 kPa
(35 psi), deflate the assembly, re-
position the tire on the rim, redu-
plicate and reinflate. After seat-
ing the bead, adjust inflation pres-
sure as recommended in the in-
flation pressure chart.
INFLATION PRESSURE
Classifi-
cation
Tire Size
Inflation
Pressure
AG
TURF
IND.
Front
9.5 - 20
14.9 - 28
140 kPa
(1.4 kgf/cm
2
,
20 psi)
140 kPa
(1.4 kgf/cm
2
,
20 psi)
Rear
Front
29 x 12.5 -
15
21.5L - 16.1
140 kPa
(1.4 kgf/cm
2
,
20 psi)
170 kPa
(1.7 kgf/cm
2
,
24 psi)
Rear
Front
12 x 16.5
17.5L - 24
140 kPa
(1.4 kgf/cm
2
,
20 psi)
140 kPa
(1.4 kgf/cm
2
,
20 psi)
Rear
To Next Page
Loading...
