Part 1 Basic Functions 1-59
NOTE
(1) Carefully remove the mis-fed paper so as not to harm your hand by cutting with the
paper edge.
(2) Take off a necklace, a bracelet and a wristwatch before removing the mis-fed paper.
You may be burnt or get an electric shock if such a metal accessory touches the inside
of the printer.
(3) The toner image is not fixed firmly if the paper did not reach the Fuser Section.
Therefore be careful not to soil your clothing with the toner when you remove the mis-fed
paper.
Please dust the toner if your clothing is soiled.
If it is unable to dust it, wash the clothing with the cold water.
(Do not use the hot water at this time because the toner will soak into fiber.)
(4) The toner image is not fixed firmly if the paper did not reach the Fuser Section.
Therefore be careful that the toner should not get into your eye, or be careful not to
inhale the toner.
(Please wash out with water if it gets into your eye or mouth.)
To Next Page
Loading...
