Part 1 Basic Functions 1-1
Part 1
Basic Functions
Page
Chapter 1 Before Use
1.1 Installation Requirements 1- 3
1.2 Originals Prohibited from Duplication 1- 4
1.3 Features 1- 5
1.4 Specifications 1- 6
1.5 Appearance 1- 7
1.5.1 Front view 1- 7
1.5.2 Rear view 1- 8
1.5.3 Operation Panel 1- 9
1.6 Indications during Normal Use 1-11
1.7 Optional Configurations 1-13
1.8 Specifications for the Printing Paper 1-15
1.8.1 Available Print Size 1-15
1.8.2 Media not to be used 1-16
1.8.3 Maintaining the Media 1-17
1.8.4 Environmental Condition - Correction 1-18
Chapter 2 Basic Operations
2.1 Turning on the KIP 7000 1-20
2.2 Turning off the KIP 7000 1-22
2.3 Replacing the Roll Media 1-23
2.4 Replacing the Toner Cartridge 1-32
2.5 Setting the Cut Sheet Paper 1-36
2.6 Dehumidifying the Roll Media 1-37
Chapter 3 Operations for the Useful Functions
3.1 Changing the Density Level 1-39
3.2 User Mode 1-40
3.2. 1 User Mode 0: (Reserved) 1-41
3.2. 2 User Mode 1: Image Enhancement Setting Mode 1-42
3.2. 3 User Mode 2: Auto Power Off Timer Setting Mode 1-44
3.2. 4 User Mode 3: Auto Power Off Setting Mode 1-45
3.2. 5 User Mode 4: Cold Sleep Timer Setting Mode 1-46
3.2. 6 User Mode 5: Cold Sleep Setting Mode 1-47
3.2. 7 User Mode 6: Warm Sleep Timer Setting Mode 1-48
3.2. 8 User Mode 7: Warm Sleep Setting Mode 1-49
3.2. 9 User Mode 8: (Reserved) 1-50
3.2.10 User Mode 9: L/L Environment Setting Mode 1-51
3.2.11 User Mode A: H/H Environment Setting Mode 1-53
3.2.12 User Mode b: High Coverage Setting Mode 1-55
3.2.13 User Mode C: (Reserved) 1-56
3.2.14 User Mode d: (Reserved) 1-57
To Next Page
Loading...
