Part 1 Basic Functions 1-44
3. 2. 3 User Mode 2: Auto Power Off Timer Setting Mode
This mode allows you to set Auto Power Off Timer.
1) Select User Mode 2 “U2.” by pressing [ ] or [ ] key.
The current setting timer is displayed.
2) Press [ * ] (increment) or [Enter] (decrement) key to change the setting value.
Timer is adjustable from 5 to 240 minutes (1 min. step).
MENU TEST
TONER REMAIN IMAGE DENSITY
job
ENTER
MENU TEST
TONER REMAIN IMAGE DENSITY
job
ENTER
The Auto Power Off is the function that the Power Switch turns OFF automatically if the
printer makes no printing (copying) operation for the time decided in the User Mode 2.
(As for turning on the printer, press “ON” of the Power Switch.)
Reference
NOTE
To make the Auto Power Off work, it is necessary to make this function ON in the Auto
Power Off Setting Mode (User Mode 3). (Refer to page 1-45)
To Next Page
Loading...
