Part 1 Basic Functions 1-20
Chapter 2 Basic Operations
2. 1 Turning on the KIP 7000
1) Plug the printer into an exclusive wall outlet.
2) There is a Power Switch (A) on the right-front of KIP 7000.
Press “ON” to turn on the KIP 7000.
WARNING
(1) Do not handle the Power Plug with wet hands, or you may receive an electrical shock.
(2) Ground the printer for safety.
(3) Do not plug the printer into a multi-wiring connector in which other devices are
plugged into. It may overheat the outlet and may result in a fire.
(4) The outlet must satisfy the following rated power condition.
220V - 240V plus 6% or minus 10%, 50/60Hz, 20A or higher
Press this side.
To Next Page
Loading...
