8-1
TECH TIPS
ADJUSTING A REFRIGERATOR DOOR
1. Unplug refrigerator or disconnect power.
2. Pull the freezer drawer out.
3. On the door you are adjusting, remove the
T-15 stop screw from the bottom hinge pin.
4. Remove the 5/16˝
hex-head screw from
the door adjustment lock plate and remove
the plate.
5. Using a 1/2˝ open-end wrench, turn the
a
djustable hinge pin 180° to adjust the
door up or down. NOTE: Make sure that
the flat sides of the hinge pin are oriented
properly so that the door adjustment lock
plate can be reinstalled properly (see the
left photo).
Lock Plate Screw
Bottom Stop Screw
Door Adjustment
Lock Plate
Adjustable Hinge Pin
Right Door Shown
To Next Page
Loading...
