4-10
REMOVING THE HEATED FLIPPER MULLION AND
AN ACTUATOR / ELECTRICAL CONTACT
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1.
Unplug refrigerator or disconnect power.
2. Open the left refrigerator door.
3. T
o remove the heated flipper mullion:
a) Rotate the flipper mullion out.
b) While lifting the flipper mullion, insert
a small flat-blade screwdriver behind
each of the three mullion retainer clips,
pry the pins out of the door liner holes,
and remove the flipper mullion.
Mullion
Pin
Mullion
Mullion
To Next Page
Loading...
