EasyManua.ls Logo

Klafs 16033 - Page 28

Klafs 16033
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SANARIUM M, S
PAGE 28
5070189/02.03
7. Troubleshooting
7.2. Further possible faults
Continued
Remedial actionCauseError
The control unit
cannot be started or
operated.
Additional option (PC)
appears in the display.
The control unit is controlled
b
y
K
l
f
s
o
n
t
r
o
l
Switch off Klafs Control.
. After approx. 5 minutes, Klafs Control
releases the control unit.
b
y
K
l
f
s
C
o
n
t
r
o
l
.
The operating panel is
blocked.
Disconnect the data line between Klafs
Control and the control unit.
The heater will not
heat up (when
controlled via Klafs
Control or building
process control GLT).
Additional option (key)
appears in the display for
30 minutes.
The load release of the sauna
cabin heater is requested via
Klafs Control or GLT.
Remove combustible objects from the
heater!
Actuate the key switch on the sauna cabin
for 1 second within 30 minutes after start at
Klafs Control or GLT.
Additional option (key)
does not appear in the
display.
The load release of the cabin
heater is not requested via
Klafs Control or GLT.
The 30 minutes waiting
period has expired.
Request the load release of the sauna cabin
heater via Klafs Control or GLT.
Remove combustible objects from the
heater!
Actuate the key switch on the sauna cabin
for 1 second within 30 minutes after start at
Klafs Control or GLT.
Fan cannot be set. Climate manager is
connected.
. The air flow is regulated by the climate
manager.
' Setting the air flow - see Section 6.8.

Table of Contents

Related product manuals