Pr55 Time for pellet side switch-on if the conditions exist after wood side switch-off
Allows setting the time (minutes) after which the pellet side automatically switches on following wood side
switch-off (see “BI-FIRE MID and BI-FIRE Functioning principle”). This parameter can be increased or
decreased if necessary to anticipate or delay pellet side ignition.
Pr67 Flue gas temperature for ventilation switch-on
Allows setting the flue gas temperature for hot air fans switch-on; only in set-up models the fans switch-on only
if set at work speed different from "0" (settable speeds: 0, 1, 2, 3). The parameter is not normally modified.
Pr68 Fan speed at ventilation power 1
Allows setting hot air fans speed at ventilation power 1 in the set-up models. The parameter is not normally
modified.
Pr69 Fan speed at ventilation power 2
Allows setting hot air fans speed at ventilation power 2 in the set-up models. The parameter is not normally
modified.
Pr70 PARAMETER NOT USED
The parameter is not used in some products.
Pr71 PARAMETER NOT USED
The parameter is not used in some products.
Pr72 PARAMETER NOT USED
The parameter is not used in some products.
To Next Page
Loading...
