KLS Martin marLED E15 - Page 60



Service ManualService Manual
Operating Lights marLEDOperating Lights marLED
®®
E9 / E9i / E9 / E9i / E15E15
60 60 V V 1.01.0
1 1 Brake Brake screwscrew
2 2 Bearing Bearing blockblock
3 3 Securing Securing segment segment with with screwscrew
•• Open lamp casing (see section 6.6 “”,Open lamp casing (see section 6.6 “”,
page 39).page 39).
Fig. 6-1: Attachment of Fig. 6-1: Attachment of cardan jointcardan joint
4 4 Cardan Cardan jointjoint
••
 Note down the connection locations ofNote down the connection locations of
the cables that are led through thethe cables that are led through the
cardan joint.cardan joint.
••
 Remove cables and cable fasteningRemove cables and cable fastening
(cable tie and holding clamps where(cable tie and holding clamps where
required).required).
Fig. 6-2: Attachment of Fig. 6-2: Attachment of cardan jointcardan joint
3 3 Securing Securing segment segment with with screwscrew
••
 Unscrew brake screw (3).Unscrew brake screw (3).
••

Remove securing segment (2).Remove securing segment (2).
Fig. 6-3: Attachment of Fig. 6-3: Attachment of cardan jointcardan joint