KMS MP25(M)/MA25(M) manual Version 4.2
60
5 Hardware installation
To guarantee that the system functions properly, it is of utmost importance to adhere to the
instructions given below.
5.1 Fitting the ECU
It is important that the ECU should be fitted in a dry and not too hot place. When fitting it, make
sure that the cover is readily accessible for easy removal. Removal is necessary for the connection
of a communication cable.
5.2 Connecting the communication cable
Remove the back of the ECU. The serial cable, which is included in the package, can be connected
at the back of the ECU.
To Next Page
Loading...